HSM SECURIO B24 Betriebsanleitung PDF herunterladen (Seite 17)

11/2012 SECURIO B 24 17

english

9 Technical data

Cutting type Strip cut Cross cut

Cut size (mm) 5.8 3.9 4.5 x 30 1.9 x 15 0.78 x 11 1 x 5

Security level DIN 32757 - 1 2 2 3 4 5 Level 6*

Cutting capacity** (sheets), A4 70 g/m

80 g/m

28 - 30

25 - 27

22 - 24

19 - 21

17 - 19

14 - 16

11 - 13

9 - 11

Weight 18 kg 20.5 kg

Cutting speed 65 mm/s

Intake width 240 mm

Power supply 230 V, 50 Hz 110 V - 120 V, 60 Hz 220 V, 60 Hz

Power consumption with max. number of sheets 500 W

Operating mode

Continuous operation

Ambient conditions in operation:

Temperature

Relative humidity

Height above sea-level (MSL)

-10 °C to +25 °C

max. 90 %, without condensation

max. 2,000 m

Size W x D x H (mm) 395 x 317 x 605

Shredded material container volume 34 l

Sound pressure level emissions

(Idle running/ load)

56 dB (A) / 59 - 63 dB (A)

* HSM-speciﬁ cation

EC Declaration of Conformity

The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-

chine, referred to here as

document shredder Securio B24

corresponds to the health and safety requirements of the following EC directives listed below due to its conception and

design of the version in which it was put into circulation by us:

Low voltage directive 2006 / 95 / EEC

EMC directive 2004 / 108 / EC

Applied standards and technical speciﬁ cations:

• EN 55014-1:2006 + A1:2009 • EN 61000-4-2:1995 + A1:1998 + A2:2001

• EN 55014-2:1997 + A1:2001 + A2:2008 • EN 61000-4-4:2004

• EN 61000-3-2:2006 + A1:2009 + A2:2009 • EN 61000-4-5:2006

• EN 61000-3-3:2008 • EN 61000-4-6:2007 + Corr. August 2007

• EN 62233:2008 • EN 61000-4-11:2004

• EN 60950-1:2006 + A11:2009 + A1:2010

Frickingen, 05.11.2012

I.V. Hubert Kötzinger - Head of Environmental Engineering Product Development

The machine type was tested for compliance with the requirements of the EC directives by:

TÜV SÜD Product Service GmbH, Zertiﬁ zierstelle, Ridlerstrasse 65, 80339 München/Germany

This test centre is responsible according to the EC directives.

** The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The

performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage

or a different mains frequency to the one speciﬁ ed could result in less sheet capacity and increased noise during op-

eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.

The performance data in 80 g/m² is calculated.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

HSM SECURIO B24 Betriebsanleitung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aktenvernichter HSM SECURIO B24